Ford will be contacting the owners of certain 2012-2018 Focus 2.0L GDI and 2.0L GTDI vehicles for a problem affecting the fuel system. According to the defect report, the power-train control module may not detect a malfunctioning Canister Purge Valve (CPV) stuck in the open position. Excessive vacuum in the fuel vapor management system could deform the the fuel tank, giving inaccurate fuel gauge readings and drivability problems.

Note: Owners are advised to keep the fuel tank at least halfway full until the vehicle has been serviced.

Dealers will correct the problem by reprogramming the Powertrain Control Module. They will also check for fault codes and replace the CPV, the carbon canister, fuel tank and fuel delivery module as necessary. Ford’s number for this recall is 18S32 and the NHTSA campaign number is 18V-735.

Honda will be contacting the owners of certain 2017 Honda CR-V’s regarding a manufacturing problem affecting the fuel system. An incorrect die may have been used to create the end form on the fuel feed pipe. The feed pipe may not attach properly to the feed hose and could disconnect when pressurized. A fuel leak could result in an engine stall and a risk of fire in the presence of an ignition source.

Owners receiving notices will be asked to return to their dealers to have the fuel supply pipe replaced. For more information about the problem, owners are asked to contact Honda customer service at 1-888-234-2138. Honda’s number for this recall is KH1 and the NHTSA campaign number is 17V-442.

Chrysler will be contacting the owners of certain 2017 Jeep Wrangler vehicles regarding a problem affecting the fuel system. The affected vehicles may have been assembled with a fuel tank that has a cracked or broken control valve. The problem could result in a fuel leak during a rollover event, debris in the fuel tank and/or the potential of over fueling the vehicle. A fuel leak in the presence of an ignition source can increase the risk of a fire.

Jeep dealers will inspect the fuel tank and replace fuel tank and sending unit as necessary. Owners wanting more information about the problem are asked to contact Chrysler customer service at 1-800-853-1403. Chrysler’s number for this recall is S90 and the NHTSA campaign number is 16V-849.

The owners of certain 2016 Nissan Titan Diesel XD trucks may experience problems with their fuel readings due to a manufacturing error affecting the fuel tank ventilation. During the assembly process, certain technicians may not have removed the temporary fuel tank breather tube cap and failed to affix the tube to the bed rail. As a result, the fuel tank may not receive proper ventilation and in rare instances may deform. This condition could result in the fuel gauge and the distance to empty meter displaying inaccurately.

Dealers will inspect the fuel tank breather tube, replacing the fuel tank, fuel sending unit, and/or fuel tank breather tube, as necessary. Owners wanting more information about the problem are asked to contact Nissan customer service at 1-800-647-7261. The NHTSA campaign number for this recall is 16V-847.

Jaguar will be contacting the owners of certain 2013-2015 Jaguar XF vehicles equipped with 2.0L GTDi engines, regarding a problem affecting the fuel system. According to the defect report, a concern has been identified where the installation of the fuel delivery line may have insufficient clearance from the vehicle’s under shield and body. If the line chafes through, drivers may notice a fuel smell inside the vehicle or a fuel puddle underneath when it is parked.

Dealers will inspect the fuel delivery lines and replace damaged ones as necessary. An anti-abrasive sleeve and two additional mounting clips will be installed to ensure clearance. For more information about the problem, owners are asked to contact Jaguar customer service at 1-800-452-4827. Jaguar’s number for this recall is J077 and the NHTSA campaign number is 16V-796.

Mazda will be contacting the owners of certain 2010-2011 Tribute vehicles equipped with 3.0L engines, regarding a problem affecting the fuel system. According to the defect report, the Fuel Delivery Module (FDM) could crack, causing a fuel leak and a potential fire. Mazda will notify owners, and dealers will replace the FDM flange with one that has a redesigned fuel supply port. The recall is expected to begin December 15, 2016. For more information about the problem, owners are asked to contact Mazda customer service at 1-800-222-5500. Mazda’s number for this recall is 0416J and the NHTSA campaign number is 16V-788.

General Motors has decided that a small number of 2016 Buick Verano vehicles may have a problem affecting the fuel system. According to the defect report filed with the NHTSA, the engine fuel line assembly was manufactured incorrectly, causing it to be misrouted over the engine. These lines could contact the hot surface of the engine and could fail, causing a fuel leak and a potential engine fire. Continue reading

Owners of certain 2016 Nissan Maxima vehicles will be returning to their dealership for repairs to the fuel system. While Nissan is continuing to examine the problem, a preliminary investigation has determined that certain vehicles may have fuel sending units that may have not been affixed to the fuel tank correctly. As a result, the 0-ring between the sending unit and fuel tank may not be seated and could leak, increasing the risk of fire during an accident. Continue reading